Solution filter

The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of DALI ballasts from a Modbus BMS, SCADA, PLC or any other device working as a Modbus Master.

Modbus DALI

I/we ACCEPT/GIVE EXPRESS CONSENT. Check our Privacy Policy.


  • IBMBSDAL0640000 (64 ballasts, 1 channel)
  • IBMBSDAL1280000 (128 ballasts, 2 channels)


  • Providing a DALI physical channel with the necessary bus voltage (about 15V) and current regulation (max. 250mA).
  • Setting the proper configuration values of the DALI ballasts (addresses, groups, max/min levels…).
  • Performing control and monitoring of the DALI ballasts in the DALI bus from a Modbus-based control system, so that the ballasts become part of the own Modbus system.
  • Support for DALI multi-master

Once set up, the gateway acts as a Modbus Server (slave) device in its Modbus interface, allowing other Modbus client (master) devices reading or writing its internal Modbus registers. These registers provide control of the DALI ballasts connected to IntesisBox.


NOTE: In case you need documentation for the previous gateway version, please check the following link:


DALI to Modbus Gateway Integration examples

Integration of Dali Ballasts into a Modbus installation

DALI to Modbus Gateway Integration examples 332

DALI to Modbus Gateway