Solution filter

The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of a KNX system from a LonWorks installation.

LonWorks KNX

I/we ACCEPT/GIVE EXPRESS CONSENT. Check our Privacy Policy.


  • IBOX-LON-KNX-200 (200 points)
  • IBOX-LON-KNX-A (500 points)
  • IBOX-LON-KNX-B (4000 points)


The IntesisBox LON-KNX is a device meant to enable interworking between KNX (TP-1) and LON (TP/FT-10) control networks.

This ending is achieved by effectively implementing both a Network Variables’ (NVs) interface on the LON side and a Communication Objects’ interface on the KNX side. Data points on either side (NVs at LON or Communication Objects at KNX) are internally bound within the IntesisBox LON-KNX, allowing the information to be moved from KNX to LON and vice-versa.

Thus, IntesisBox LON-KNX will be seen as a regular LON device on the LON TP/FT-10 network and a regular KNX device at the KNX TP-1 network.

The set of Communication Objects on the KNX interface, the set of NVs at the LON interface and the bindings between them are defined in the IntesisBox LON-KNX at configuration time.

KNX to LonWorks Gateway Integration examples

Integration of KNX devices into a LonWorks installation

KNX to LonWorks Gateway Integration examples 329

Does your project not fit the product description, but you need to integrate the LonWorks and KNX protocols?

Maybe our IBOX-KNX-LON gateway is what you are looking for.


KNX to LonWorks Gateway

  • Commercial documents