Solution filter

The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of Mitsubishi Heavy Industries systems (through SuperLink bus) from a KNX installation.

KNX Mitsubishi Heavy Ind AC

I/we ACCEPT/GIVE EXPRESS CONSENT. Check our Privacy Policy.

ORDER CODE: 

  • MH-AC-KNX-48 (for 48 indoor units)
  • MH-AC-KNX-128 (for 128 indoor units)

DESCRIPTION:

IntesisBox KNX – Mitsubishi Heavy Industries AC is a communication gateway for the integration of Mitsubishi Heavy Industries air conditioning systems into KNX TP-1 (EIB).

IntesisBox KNX continuously polls (reads) the Mitsubishi Heavy Industries Superlink bus for all configured signals and keeps the updated status of all of them in its memory ready to be served when requested from KNX.

On the KNX side, IntesisBox simulates a KNX device and acts as if it was one more device into the KNX system.

The IntesisBox's KNX EIB interface connects directly to the EIB bus and is optoisolated from the rest of the internal electronics. Any point in IntesisBox can be configured individually for different functionality.
To allow read requests, to allow write requests, to automatically send a write request to the KNX bus when its value changes, and to send a read request to the KNX bus when IntesisBox starts-up or after a bus reset.

For each point, one main group address and different listening group addresses can be defined. This useful feature allows actions on the same internal point from multiple KNX group addresses.

Mitsubishi Heavy Industries SuperLink systems to KNX Gateway Integration examples

Integration of Mitsubishi Heavy Industries Air Conditioner Units through Superlink connection into a KNX installation

Mitsubishi Heavy Industries SuperLink systems to KNX Gateway Integration examples 347

Mitsubishi Heavy Industries SuperLink systems to KNX Gateway
downloads

  • Commercial documents