Solution filter

The IntesisBox IBOX-BAC-DALI Gateway has been specially designed to work as a translator between a DALI installation and BACnet IP and/or BACnet MSTP based control and monitoring systems.


I/we ACCEPT/GIVE EXPRESS CONSENT. Check our Privacy Policy.


  • IBBACDAL0640000, 64 DALI ballasts (1 DALI channel)
  • IBBACDAL1280000, 128 DALI ballasts (2 DALI channels)


The aim of this integration is:

  • Providing a DALI physical channel with the necessary bus voltage (about 15V) and current regulation (max. 250mA).
  • Setting the proper configuration values of the DALI ballasts (addresses, groups, max/min levels, …).
  • Performing control and monitoring of the DALI ballasts in the DALI bus from a BACnet/IP-based control system or device, so that the ballasts become part of the own BACnet system.

Once set up, the gateway acts as a BACnet/IP Server device in its BACnet interface, allowing other BACnet/IP client devices to perform COV subscription requests, and reading or writing its internal BACnet objects. These objects provide control of the DALI ballasts connected to IntesisBox.


  • Handles conversion between BACnet (IP & MSTP) and DALI ballasts.
  • Manages BACnet IP and BACnet MSTP simultaneously*.
  • DALI multi-master support.
  • DALI line scan (ballast detection) and commissioning.
  • Configuration through IP or USB (Console) port.
  • Datalogging through external USB port.
  • Front cover LED indicators to provide easy to check communication status on both the Ethernet and serial ports.
  • Includes IntesisBox MAPS with automatic updates for both IntesisBox MAPS and Gateway’s firmware.

          * IBBACDALI128xxxx does not offer BACnet MSTP communication.


NOTE: In case you need documentation for the previous gateway version, please check the following link:

DALI to BACnet Gateway Integration examples

Integration of Dali Ballasts into a BACnet installation

DALI to BACnet Gateway Integration examples 315

DALI to BACnet Gateway

  • Commercial documents