Solution filter

The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a BMS, SCADA, PLC or any other device working as a Modbus Master.

Modbus Mitsubishi Electric AC

I/we ACCEPT/GIVE EXPRESS CONSENT. Check our Privacy Policy.

ORDER CODE: 

  • IBMBSMIT050C000 (50 Indoor Units)
  • IBMBSMIT100C000 (100 Indoor Units)

DESCRIPTION:

IntesisBox Modbus Server - Mitsubishi Electric G50 is a communication gateway for Mitsubishi Electric City Multi air conditioning systems to Modbus slave (RTU and TCP).

This integration requires the Mitsubishi Electric City Multi AC system be equipped with the Mitsubishi Electric G-50A, GB-50A, AG-150A or equivalent gateway.

IntesisBox continuously polls (read) all the signals configured of the G50's and maintains the updated values to be served in Modbus. When a write is done from Modbus in a gateway's Modbus address (allowed to be written), the corresponding order is sent to the City Multi-signal associated.

IntesisBox automatically detects the groups configured in every G50. Those groups not found during the first poll are deactivated automatically in the polling process. This behavior can be disabled in IntesisBox®.

 

NOTE: In case you need documentation for the previous gateway version, please check the following link:
https://www.intesisbox.com/en/mitsubishi-electric-modbus-central-me-ac-mbs-discontinued/gateway/

Mitsubishi Electric AC Multi systems to Modbus Gateway Integration examples

Integration of Mitsubishi Electric Domestic City Multi Units through Central Controller into an Modbus installation

Mitsubishi Electric AC Multi systems to Modbus Gateway Integration examples 345

Mitsubishi Electric AC Multi systems to Modbus Gateway

downloads

  • Technical documentation